22km Drone Ethernet TCP/UDP & Bi-directional Data Transmission Radios

Model: FIP-2420

FIP-2420 is 2.4Ghz point-to-point drone digital Ethernet data downlink radio base on TDD-COFDM wireless communication technology. It supports 2.4GHz (2. 402~2. 478 GHz) and suitable for long distance, high code stream and wireless transmitting application. The transmitting rate up to be 3/6Mbps and the farthest transmission distance is 22km air to ground. This model has advantages of light weight, mini size, low power consumption, high stability and receiving sensitivity. It supports two-way TCPIP/UDP Ethernet data and duplex serial data transmission.

Inquire

Product Detail

Features

● Built-in Integration

Offering control, telemetry & payload in, Video Transmission in 1 RF channe

● Optimized for Long-range Video Transmission

20-22Km Full 1080P HD real-time video embedded bi-directional data link

● Compact &Lightweight

Miniature size and weight are ideal for high-use applications.

● Compact &Lightweight

Miniature size and weight are ideal for high-use applications.

20km 2.4G IP video and TTL data-FIP-2420

20km 2.4G IP video and TTL data-FIP-2420-2

●Transmission Frequency Bandwidth

4/8Mhz Adjustable

● Compatible with a broad range of flight controllers, mission software

Double Serial Ports for bi-directional Data.

Supports TCP/UDP/TTL/RS232/MAVLINK Telemetry

● Good impact resistance

Conductive anodizing craft and CNC technology double aluminum alloy Shell. Two fans to cooling

Coded Orthogonal Frequency Division Multiplexing (COFDM)
Effectively eliminate multipath interference, resolve the efficiency problem and improve the reliability of transmission.

End to End Low Latency
● Latency from tx to rx less than 33ms.
● CABAC entropy encoding and high compression rate to guarantee high video quality at low bitrate
● Each frame is encoded to same size to ensure no additional latency in wireless channel caused by large I frame.
● Ultra fast decoding to display engine.

Long Range Communication
Advanced modulation, FEC alogrithm, high performance PA and ultra sensitive receiver RF module to keep a stable and long range wireless link between air unit to ground control station.

-40℃~+85℃ working temperature
All chips and electronic components are special designed with industrial grade tolerating -40℃~85℃

Various Ports

FIP-2420 offers RJ45 and TTL bi-directional serial port and RS232 Port. This model can wireless transmit serial data and Ethernet data based on TCP/IP/UDP. SMA Port interface can directly connected Antennas or feeder cable.

20km 2.4G IP video and TTL data-FIP-2420 interface -3

Application

FIP2420 is an Ethernet bi-direction Drone Video Transmitter that provides robust video transmission for long distance.

It’s the ideal solution for Drones and Unmanned Aerial Vehicles (UAV), Unmanned Ground Vehicles (UGV), long-range wireless video and telemetry, critical and secure applications.

Specification

Frequency	2.4GHz (2.402-2.482GHz) 2.3Ghz(2304Mhz-2390Mhz)
RF Transmitting Power	33dBm(air to ground 18-22km)
Frequency Bandwidth	4/8MHz
Antenna	1T1R
Adjust bit rate	Software adjustment
Encryption	AES128
Transmission Mode	point to point
Start-up time	25s
Link rebuilt time	＜1s
Error Detection	LDPC FEC
Serial Data	TTL: 0-3.3v
	RS232: ±13V
Ethernet	Support TCP/IP/UDP
Transmission Rate	3/6Mbps
Sensitivity	-100dbm@4Mhz
	-95dbm@8Mhz
Antenna	1T1R(Omni Antenna)
Power	DC7-18V(DC12V Suggested)
Power Consumption	TX: 16Watts
	RX: 5Watts
Temperature	Operating temperature: -40 - +85°C
	Storage temperature: -55 - +85°C
Interface	Power input interface × 1
	Antenna interface × 1
	TTL Bidirectional Port × 2
	RS232 Interface x 1(TTL and RS232 can not be used at same time)
	Ethernet Port x1
Indicator	Power indicator light
	Connection Status Indicator(4, 5, 6)
	Signal Strength Indicator(1, 2, 3)
Metal Case Design	CNC technology
	Double aluminum alloy shell
	Conductive anodizing craft
Size	TX: 76.4×72.9x22.5mm
Weight	TX: 120g
	Rx: 120g