nybanner

80km Long Range Drone HDMI and SDI Video Transmitter and Serial Data Downlink

Model: FMS-8480

The IWAVE FMS-8480 drone HDMI and SDI video transmitter and serial data downlink provides robust video and control channels for big drones(VTOL/Fixed wing drone) with HDMI, SDI and IP video input. It delivers full HD video and MAVLINK flight control data wireless mobile communication without any infrastructure for 80km.

FMS-8480 drone camera transmitter is based on enhanced TDD-COFDM technology, which gives FMS-8480 an ability to support high throughput up to 6Mbps in the video channel and superior robustness in the control channel when distance is 80km range.

Onboard unit of FMS-8480 weights only 250grams (8.8 ounces)

Video channel can be easily connected through the HDMI interface, SDI interface and Ethernet interface. Serial interfaces can be used for the control channel.


Product Detail

Features

• Dual Tx antenna and Dual Rx antenna.
• 80 km+ (49.7 miles+) line-of-sight (LOS) range.
• Throughput up to 6Mbps for 80km.
• Channels for video, telemetry and control in one device.
• End to end 40ms for 720P60 video
• End to end 50ms for 1080P30 video
• End to end 80ms for 1080P60 video
• Air unit is only 250grams(8.8 ounces)
• Highly efficient H.264+H.265/FPGA Encoding

80km Long Range Drone HDMI and SDI Video and Serial Data Downlink1

800Mhz and 1.4G Band Operation

 

FMS-8480 drone long range video transmitter uses the 806 to 826Mhz and 1428-1448Mhz frequency range to avoid interfering with aircraft control systems, which are usually 2.4 GHz.

FHSS for Anti-interference

 

Automatic Frequency Hopping Spread Sprectrum (FHSS) will choose the best available channel to be used for anti-interference.

SDI/HDMI/IP Camera input

80km Long Range Drone HDMI and SDI Video and Serial Data Downlink2

Video Input: Ethernet port for IP camera, mini hdmi port for HDMI camera and SMA port for sdi camera.

Video Outout: HDMI, SDI and Ethernet.

 

Flight Control

FMS-8480 has two full duplex serial ports. They are able to wireless transmit the control signal for flight controller fixed on the UAV. It has been smoothly work with pixhawk 2 /cube/v2.4.8/4 , Apm2.8, etc. Ground software support Mission planner and QGround.

 

Encrypted Transmission

FMS-8480 drone digital video transmitter employs AES128 for the video encryption to ensure no one unauthorized is able to intercept your video feed.

Application

80km Long Range Drone HDMI and SDI Video and Serial Data Downlink3

Drone Video downlink is to transmit video accurately and quickly from one place to another to make people on ground see clear what happening in real time. Therefore, drone video transmitter is also known as the "eyes" of drones. It plays an essential role in emergency event such as oil pipe line inspection, high voltage inspection, forest fire monitoring and etc. With the real time video streaming, people on ground can quickly response once the emergency event happen.

Specification

Frequency 800Mhz 806~826MHz
  1.4Ghz 1428~1448MHz
AntI-interference Frequency hopping
Bandwidth 8MHz
RF Power 4W
Transmit Range 80km
Date Rate 6Mbps (shared by video, Ethernet and serial data)The best video stream: 2.5Mbps
Baud Rate 115200
Rx Sensitivity -104dbm
Wireless Fault Tolerance Algorithm Wireless baseband FEC forward error correction/video codec super error correction
Video Latency Total Latency for encoding + transmitting + decoding
720P/60 <50 ms
720P/30 <40 ms
1080P/60 <80ms
1080P/30 <50ms
Link Rebuild Time <1s
Modulation Uplink QPSK/Downlink QPSK
Video Compression Format H.264
Video Color Space 4:2:0 (Option 4:2:2)
Encryption AES128
Start Time 15s
Power DC-12V (7~18V)
Interface Interfaces on Tx and Rx are same1*Video input/Output: Mini HDMI
1*Video input/Output: SMA(SDI)
1*Power Input Interface
2*Antenna Interface: SMA
2*Serial (3.3VTTL)
1*LAN (100Mbps)
Indicators PowerWireless Link Status Indicator
Power Consumption Tx: 28W(Max)Rx: 18W
Temperature Working: -40 ~+ 85℃Storage: -55 ~+100℃
Dimension Tx/Rx: 93*93*25.8mm(not include SMA & Power plug)
Weight Tx/Rx: 250g
Metal Case Design CNC Craft
  Double Aluminum Alloy Shell
  Conductive Anodizing Craft

 


  • Previous:
  • Next: